AfricoteTexturedInterior & exterior

AFRICOTE WALLMASTER

s.com Afri Cote WALLMASTER PRODUCT Afri Cote Wallmaster is a 100% pure acrylic emulsion based eco-friendly textured coating reinforced with specific graded hard aggregates and color stable pigments. It has excellent Ultra violet and alkali resistance. Africoat Wallmaster provides long life protection with a good crack bridge ability property. It contains anti fungal and anti bacterial additives.

Coverage: 9.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 931

Tin sizeQuantity

Features & benefits

Decorative texture

A tactile finish that masks hairline cracks and adds depth.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 9 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Coverage: Approximately 1 m² per 2.5 – 3.0 Kilos
Specific gravity: 1.50 - 2.00 Depending on type of texture
Drying time: Surface dry – 1 Hour, Hard dry - 10 Hours.
Packing size: 30 Kgs, 6 Kgs
Thinner: It can be thinned with fresh water for ease of application. EQUIPMENT
Application: Can be applied using a metal and plastic trowel. Thin and stir as per requirement
Surface preparation: Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Africoat Wallmaster should be applied over appropriately primed & undercoated surfaces
Cleaning: Equipment should be cleaned immediately after use with water.
Colours: Please refer to our Africoat Wallmaster catalogue for availabile range of colours.
Texture: d www.maroo
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Universal Undercoat
Apply 2 coats of AFRICOTE WALLMASTER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of AFRICOTE WALLMASTER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of AFRICOTE WALLMASTER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Universal Undercoat.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

AFRICOTE WALLMASTER

Coverage

9.00 m²/L

Coats

Price

Ksh 0/L

SKU

931

Tin sizeQuantity

Features & benefits

Decorative texture

A tactile finish that masks hairline cracks and adds depth.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 9 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Coverage

Approximately 1 m² per 2.5 – 3.0 Kilos

Specific gravity

1.50 - 2.00 Depending on type of texture

Drying time

Surface dry – 1 Hour, Hard dry - 10 Hours.

Packing size

30 Kgs, 6 Kgs

Thinner

It can be thinned with fresh water for ease of application. EQUIPMENT

Application

Can be applied using a metal and plastic trowel. Thin and stir as per requirement

Surface preparation

Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Africoat Wallmaster should be applied over appropriately primed & undercoated surfaces

Cleaning

Equipment should be cleaned immediately after use with water.

Colours

Please refer to our Africoat Wallmaster catalogue for availabile range of colours.

Texture

d www.maroo

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Universal Undercoat.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.