AfricoteMattInterior & exterior

EPOXY TOPCOAT ENAMEL

2 component floor coating High hardness - exceptional abrasion resistance Exceptional chemical resistance (oil, fuel, several solvents, etc.) Solvent-free - almost odourless Easy to maintain High mechanical resistance Available in several shades

Coverage: 13.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 1076

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 13 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type: Solvent-based
Coverage: Approximately 13.00 m² per litre per coat (typical)
Number of coats: 2 (typical)
Drying time: Surface dry 1–2 hours, recoat after 16–24 hours (typical)
Thinner: Mineral turpentine / thinner (typical)
Application: Brush, roller or spray (typical)
Cleaning: Clean equipment with thinner immediately after use (typical)

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of EPOXY TOPCOAT ENAMEL

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of EPOXY TOPCOAT ENAMEL

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of EPOXY TOPCOAT ENAMEL

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator