ColourtrendGlossInterior & exterior

HIGH GLOSS ENAMEL

s.com 3 MAROO HIGH GLOSS ENAMEL PRODUCT Maroo High Gloss Enamel is an economy quality synthetic enamel based on synthetic alkyd resin and pigmented with selected pigments. It is resistant to routine washing and scrubbing.

Coverage: 13.50 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 977

Tin sizeQuantity

Features & benefits

Rich high-gloss

A deep, reflective shine that wipes clean and resists marks.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 13.5 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type: Solvent-based
Coverage: Approximately 13 to 14 m²/litre per coat on smooth surface
Specific gravity: 1.00 ± 0.05
Drying time: Surface Dry : 3 – 5 Hours Hard dry : 6 - 8 Hours Recoating : After 24 Hours
Packing size: 20 Litres, 4 Litres, 1 Litre, ½ Litre, ¼ Litre
Thinner: It can be thinned with white spirit depending on type of application. EQUIPMENT
Application: Can be applied using brush, roller or by spraying. Thin and stir as per requirement
Surface preparation: Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Smoothen out with sand paper to provide required smoothness. Maroo High Gloss Enamel should be applied over appropriately primed & undercoated surfaces
Cleaning: Equipment should be cleaned immediately after use with white spirit.
Colours: Available in wide range of colours. Please refer to our shade card for standard available colours. Special colours can be manufactured on request.
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Universal Undercoat
Apply 2 coats of HIGH GLOSS ENAMEL

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of HIGH GLOSS ENAMEL

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of HIGH GLOSS ENAMEL

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Universal Undercoat.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

HIGH GLOSS ENAMEL

Coverage

13.50 m²/L

Coats

Price

Ksh 0/L

SKU

977

Tin sizeQuantity

Features & benefits

Rich high-gloss

A deep, reflective shine that wipes clean and resists marks.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 13.5 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type

Solvent-based

Coverage

Approximately 13 to 14 m²/litre per coat on smooth surface

Specific gravity

1.00 ± 0.05

Drying time

Surface Dry : 3 – 5 Hours Hard dry : 6 - 8 Hours Recoating : After 24 Hours

Packing size

20 Litres, 4 Litres, 1 Litre, ½ Litre, ¼ Litre

Thinner

It can be thinned with white spirit depending on type of application. EQUIPMENT

Application

Can be applied using brush, roller or by spraying. Thin and stir as per requirement

Surface preparation

Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Smoothen out with sand paper to provide required smoothness. Maroo High Gloss Enamel should be applied over appropriately primed & undercoated surfaces

Cleaning

Equipment should be cleaned immediately after use with white spirit.

Colours

Available in wide range of colours. Please refer to our shade card for standard available colours. Special colours can be manufactured on request.

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Universal Undercoat.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.