AfricoteMattInterior

PLASTER FILLER

s.com 10 Afri Cote Plaster Filler PRODUCT Afri Cote Plaster Filler is a ready to use filler for masonay and wooden surface. It has an excellent adhesion, minimum shrinkage, fast drying and good sandability.It can be used on masonay surfaces, plasters, plaster boards and wall boards.

Coverage: 10.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 915

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 10 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Base type: Solvent-based
Coverage: Approximately 3 to 5 square meters per kg depending on surface
Specific gravity: 1.60 ± 0.05
Drying time: 15 - 30 Mins Sand ability & Overcoating after 1 Hour
Packing size: 25 Kgs, 6 Kgs.
Thinner: It can be thinned with fresh water depending on type of application. EQUIPMENT
Application: Can be applied using trowel. Thin and stir as per requirement
Surface preparation: Ensure that the surface is clean, dry and free from oil, grease or loose material. Apply Afri cote plaster filler and level it with the masonary trowel in order to fill the holes and unevenness of the surface. After drying, make a light sanding with sand paper in order to get a smooth even surface.
Cleaning: Equipment should be cleaned immediately after use with fresh water.
Colours: White, Soft white
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of PLASTER FILLER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of PLASTER FILLER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of PLASTER FILLER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

PLASTER FILLER

Coverage

10.00 m²/L

Coats

Price

Ksh 0/L

SKU

915

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 10 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Base type

Solvent-based

Coverage

Approximately 3 to 5 square meters per kg depending on surface

Specific gravity

1.60 ± 0.05

Drying time

15 - 30 Mins Sand ability & Overcoating after 1 Hour

Packing size

25 Kgs, 6 Kgs.

Thinner

It can be thinned with fresh water depending on type of application. EQUIPMENT

Application

Can be applied using trowel. Thin and stir as per requirement

Surface preparation

Ensure that the surface is clean, dry and free from oil, grease or loose material. Apply Afri cote plaster filler and level it with the masonary trowel in order to fill the holes and unevenness of the surface. After drying, make a light sanding with sand paper in order to get a smooth even surface.

Cleaning

Equipment should be cleaned immediately after use with fresh water.

Colours

White, Soft white

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Acrylic Primer.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.