ColourtrendMattInterior

PLASTIC DISTEMPER

4L, 20L Maroo Plastic Distemper is an acrylic co-polymer based economical distemper paint with a smooth, flat finish. It contains anti fungal and anti bacterial additives.

Coverage: 11.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 980

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 11 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Base type: Water-based
Coverage: Approximately 11.00 m² per litre per coat (typical)
Number of coats: 2 (typical)
Drying time: Surface dry 30–60 min, recoat after 2–4 hours (typical)
Thinner: Clean water (typical)
Application: Brush, roller or spray (typical)
Cleaning: Clean equipment with water immediately after use (typical)
Colours: Available in wide range of colours. Please refer to our shade card for standard available colours. Special colours can be manufactured on request.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of PLASTIC DISTEMPER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of PLASTIC DISTEMPER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of PLASTIC DISTEMPER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator