AfricoteMattInterior

SANDING SEALER

s.com 9 Afri Cote Sanding Sealer PRODUCT Afri Cote NC Sanding Sealer is a specially formulated fast drying sanding sealer based on short oil alkyd & nitrocellulose. It has an excellent sanding ability, quick drying & filling properties.

Coverage: 8.50 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 920

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 8.5 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Base type: Solvent-based
Coverage: Approximately 7 to 10 square meters per litre coat depending on surface
Specific gravity: 0.99 ± 0.05
Drying time: 10 - 15 Mins Sand ability & Overcoating after 30 Mins
Packing size: 20 Litres, 4 Litres, 1 Litre
Thinner: It can be thinned with Maroo high gloss thinner depending on type of application. EQUIPMENT
Application: Can be applied using brush or spraying. Thin and stir as per requirement
Surface preparation: Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. For better performance of this product, apply 2 coats and sand down after each coat.
Cleaning: Equipment should be cleaned immediately after use with high gloss thinner.
Colours: Clear
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of SANDING SEALER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of SANDING SEALER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of SANDING SEALER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

SANDING SEALER

Coverage

8.50 m²/L

Coats

Price

Ksh 0/L

SKU

920

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 8.5 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Base type

Solvent-based

Coverage

Approximately 7 to 10 square meters per litre coat depending on surface

Specific gravity

0.99 ± 0.05

Drying time

10 - 15 Mins Sand ability & Overcoating after 30 Mins

Packing size

20 Litres, 4 Litres, 1 Litre

Thinner

It can be thinned with Maroo high gloss thinner depending on type of application. EQUIPMENT

Application

Can be applied using brush or spraying. Thin and stir as per requirement

Surface preparation

Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. For better performance of this product, apply 2 coats and sand down after each coat.

Cleaning

Equipment should be cleaned immediately after use with high gloss thinner.

Colours

Clear

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Acrylic Primer.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.