AfricoteTexturedInterior

SPRAY PLASTER

s.com Afri Cote SPRAY PLASTER PRODUCT Afri Cote Spray plaster is an acrylic emulsion based eco-friendly coating reinforced with Specific graded fillers. It gives different type of designs & textures depending on the application mehtod. Afri Cote Spray plaster is suitable for Ceilinig decoration & provides long life protection with a good crack bridge ability property. It contains anti fungal and anti bacterial additives.

Coverage: 10.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 922

Tin sizeQuantity

Features & benefits

Decorative texture

A tactile finish that masks hairline cracks and adds depth.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 10 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Coverage: Approximately 1 m² per 0.5 – 2.5 Kilos depending on type of design required.
Specific gravity: 1.50 -1.60
Drying time: Surface dry – 1 Hour, Hard dry - 24 Hours.
Packing size: 25 Kgs, 6 Kgs
Thinner: It can be thinned with fresh water for ease of application. EQUIPMENT
Application: Can be applied using a trowel, roller or spray application. Thin and stir as per requirement
Cleaning: Equipment should be cleaned immediately after use with water.
Colours: White / Soft White
Texture: d www.maroo
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Universal Undercoat
Apply 2 coats of SPRAY PLASTER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of SPRAY PLASTER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of SPRAY PLASTER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Universal Undercoat.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

SPRAY PLASTER

Coverage

10.00 m²/L

Coats

Price

Ksh 0/L

SKU

922

Tin sizeQuantity

Features & benefits

Decorative texture

A tactile finish that masks hairline cracks and adds depth.

Tough protective coating

Engineered to protect demanding interior and exterior surfaces.

Goes further

Covers up to 10 m² per litre per coat, so you buy less.

Washable & low odour

Scrubs clean and lets you back into the room sooner.

Technical data

Coverage

Approximately 1 m² per 0.5 – 2.5 Kilos depending on type of design required.

Specific gravity

1.50 -1.60

Drying time

Surface dry – 1 Hour, Hard dry - 24 Hours.

Packing size

25 Kgs, 6 Kgs

Thinner

It can be thinned with fresh water for ease of application. EQUIPMENT

Application

Can be applied using a trowel, roller or spray application. Thin and stir as per requirement

Cleaning

Equipment should be cleaned immediately after use with water.

Colours

White / Soft White

Texture

d www.maroo

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Universal Undercoat.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.