ColourtrendMattInterior & exterior

SUPER FLOOR PAINT

It provides maximum resistance to chemical attack, abrasion, and water penetration. Super Floor paint is recommended for use on all types of floor surfaces. 1L, 4L, 20L

Coverage: 9.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 823

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 9 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type: Solvent-based
Coverage: Approximately 9.00 m² per litre per coat (typical)
Number of coats: 2 (typical)
Drying time: Surface dry 1–2 hours, recoat after 16–24 hours (typical)
Thinner: Mineral turpentine / thinner (typical)
Application: Brush, roller or spray (typical)
Cleaning: Clean equipment with thinner immediately after use (typical)

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of SUPER FLOOR PAINT

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of SUPER FLOOR PAINT

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of SUPER FLOOR PAINT

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator