ColourtrendGlossInterior & exterior

VINYL SILK EMULSION

s.com Colourtrend SILK VINYL EMULSION PRODUCT Colourtrend Silk Vinyl Emulsion is a high quality vinyl co-polymer based washable emulsion paint with a smooth, silky decorative

Coverage: 13.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 802

Tin sizeQuantity

Features & benefits

Rich high-gloss

A deep, reflective shine that wipes clean and resists marks.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 13 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type: Water-based
Coverage: Approximately 11 to 15 m²/litre per coat depending on porocity of surface
Specific gravity: 1.28 ± 0.05
Drying time: Recoating after 1 - 2 Hours
Packing size: 20 Litres, 4 Litres, 1 Litre
Thinner: It can be thinned with fresh water depending on type of application. EQUIPMENT
Application: Can be applied using brush, roller or by spraying. Thin and stir as per requirement
Surface preparation: Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Smoothen out with sand paper to provide required smoothness. Colourtrend Silk Vinyl Emulsion should be applied over appropriately primed & undercoated surfaces
Cleaning: Equipment should be cleaned immediately after use with water.
Colours: Available in wide range of colours. Please refer to our shade card for standard available colours. Special colours can be manufactured on request.
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Universal Undercoat
Apply 2 coats of VINYL SILK EMULSION

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of VINYL SILK EMULSION

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of VINYL SILK EMULSION

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Universal Undercoat.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

Technical data

Base type

Water-based

Coverage

Approximately 11 to 15 m²/litre per coat depending on porocity of surface

Specific gravity

1.28 ± 0.05

Drying time

Recoating after 1 - 2 Hours

Packing size

20 Litres, 4 Litres, 1 Litre

Thinner

It can be thinned with fresh water depending on type of application. EQUIPMENT

Application

Can be applied using brush, roller or by spraying. Thin and stir as per requirement

Surface preparation

Ensure that the surface to be painted is clean, dry and free from oil, grease or loose material. Fill up small cracks or dents with filler or putty. Smoothen out with sand paper to provide required smoothness. Colourtrend Silk Vinyl Emulsion should be applied over appropriately primed & undercoated surfaces

Cleaning

Equipment should be cleaned immediately after use with water.

Colours

Available in wide range of colours. Please refer to our shade card for standard available colours. Special colours can be manufactured on request.

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Universal Undercoat.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.