ColourtrendMattInterior & exterior

ZINC CHROMATE RED OXIDE PRIMER

s.com 12 Colourtrend ZINC CHROMATE RED OXIDE PRIMER PRODUCT Colourtrend Zinc Chromate Red Oxide Primer is a premium quality anti corrosive primer for metal. It is based on a synthetic alkyd resin and an anti corrosive pigments like Zinc Chromate & Red Oxide.

Coverage: 9.00 m²/L
Coats: 2
Price: Ksh 0/L
SKU: 972

Tin sizeQuantity

Features & benefits

Smooth matt finish

A soft, flat look that gently hides surface imperfections.

True colour, that lasts

Premium pigments hold true-to-chart colour for years.

Goes further

Covers up to 9 m² per litre per coat, so you buy less.

Weather & UV guard

Resists sun, rain and fading for lasting exterior protection.

Technical data

Base type: Solvent-based
Coverage: Approximately 8 to 10 m²/litre per coat Depending on surface.
Specific gravity: 1.05 ± 0.05
Drying time: Surface Dry : 3 – 5 Hours Hard dry : 6 - 8 Hours Recoating : After 24 Hours
Packing size: 20 Litres, 4 Litres, 1 Litre
Thinner: It can be thinned with Maroo white spirit depending on type of application. EQUIPMENT
Application: Can be applied using brush, roller or by spraying. Thin and stir as per requirement
Surface preparation: Ensure that the surface to be primed is clean, dry and free from oil, grease or loose material. For most of iron and steel surfaces, Apply one coat of Colourtrend Zinc Chromate red oxide Primer, allow it to dry for 16 - 24 hours and then apply subsequent Undercoat or Topcoat.
Cleaning: Equipment should be cleaned immediately after use with Maroo white spirit.
Colours: Red
Remark: Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Thousands of shades available — browse the colour range or try it in the room visualiser.

How to apply

New plaster & masonry

Seal bare areas with Acrylic Primer
Apply 2 coats of ZINC CHROMATE RED OXIDE PRIMER

Wood & joinery

Prime knots and bare timber
Undercoat, then 2 coats of ZINC CHROMATE RED OXIDE PRIMER

Metal

Spot-prime with a suitable metal primer
Finish with 2 coats of ZINC CHROMATE RED OXIDE PRIMER

Surface preparation

1Make sure the surface is clean, dry and sound.
2Lightly sand glossy or previously painted areas for adhesion.
3Prime bare or porous areas with Colourtrend Acrylic Primer.
4Fill cracks and holes, then sand smooth and dust off.
5Allow new plaster and cement to fully cure before painting.

Need a hand specifying or estimating?

Get a quote Paint calculator

ZINC CHROMATE RED OXIDE PRIMER

Coverage

9.00 m²/L

Coats

Price

Ksh 0/L

SKU

972

Tin sizeQuantity

Technical data

Base type

Solvent-based

Coverage

Approximately 8 to 10 m²/litre per coat Depending on surface.

Specific gravity

1.05 ± 0.05

Drying time

Surface Dry : 3 – 5 Hours Hard dry : 6 - 8 Hours Recoating : After 24 Hours

Packing size

20 Litres, 4 Litres, 1 Litre

Thinner

It can be thinned with Maroo white spirit depending on type of application. EQUIPMENT

Application

Can be applied using brush, roller or by spraying. Thin and stir as per requirement

Surface preparation

Ensure that the surface to be primed is clean, dry and free from oil, grease or loose material. For most of iron and steel surfaces, Apply one coat of Colourtrend Zinc Chromate red oxide Primer, allow it to dry for 16 - 24 hours and then apply subsequent Undercoat or Topcoat.

Cleaning

Equipment should be cleaned immediately after use with Maroo white spirit.

Colours

Red

Remark

Atmospheric conditions like temperature and humidity, film thickness, interval of coats etc. can affect on drying time.

Surface preparation

1Make sure the surface is clean, dry and sound.

2Lightly sand glossy or previously painted areas for adhesion.

3Prime bare or porous areas with Colourtrend Acrylic Primer.

4Fill cracks and holes, then sand smooth and dust off.

5Allow new plaster and cement to fully cure before painting.